About Our Council Bluffs Metal Roof Coating Work
Inspecting Every Panel Before Recommending a Coating
Here is what to know about our Council Bluffs metal roof coating work: what we check, what we fix, and what we turn down.
What to Know About Our Council Bluffs Metal Roof Coating Work
Before any talk of price, we walk the roof. Everything about our Council Bluffs metal roof coating work starts with a panel-by-panel look at laps, screws, gutters, curbs, and the rust that has crept in around them.
Coating only makes sense on steel that is still solid. When a section has rusted through or the insulation under it is soaked, we say so and price the repair before any coating is discussed.
- Commercial buildings only: warehouses, shops, plants, offices, and farm business buildings
- Insulation cores pulled wherever water has been getting in
- Rust primed and failed screws replaced before any topcoat
- Coating thickness read with a gauge while it goes on
Have a Roof You Want Us to Look At?
Book the inspection and we will walk every panel line, then tell you whether coating fits your roof.
Our Roof Inspection Checklist
These are the items we check on every roof before a coating is recommended.
- Side laps and end laps for open sealant and wicking stains
- Screw rows for backed-out heads and cracked washers
- Rust at cut edges, screw heads, and panel faces
- Box gutters, valleys, and downspouts for debris and ponding
- Rooftop unit curbs, vents, and pipe boots
- Ridge caps, rake trim, and wall-to-roof flashing
- Insulation cores where water has been leaking
- Hail dents and chipped finish that expose bare steel
What We Do and What We Turn Down
Clear limits make a coating job go well. These two lists show where we draw the line.
What We Do on Your Roof
- Roof Types
- Commercial metal, low-slope, foam, shingle
- Rusty Steel
- Primed, refastened, sealed
- Recommendation
- Told after the roof walk
- Coating Thickness
- Measured with a mil gauge
- Permits
- Through the city or county office
What We Turn Down
- Roof Types
- Houses and garages at homes
- Rusty Steel
- Rust-through left in place
- Recommendation
- Quoted without a roof walk
- Coating Thickness
- Thinned to cut cost
- Permits
- Skipped when one is required
Questions About Our Council Bluffs Metal Roof Coating Work?
Call or book an inspection, and we will walk your roof with you.